Description

Features

• PTB-A 50-7 & 20.1 Certified for Eichrecht
• Three phase 100A Direct Fed
• MID B+D Certified
• Import/ Export Energy
• RS485 Modbus Communication
• Multi Parameter measurement
• Supports OCMF Communication protocol
• Charge control information, Status of charging, Charge duration, Consumption, Charge point identification
• Operating Temperature range -40 C to +70 C
• 4 Module DIN rail mounted

The SDM630-EV has been designed specifically for use within Electric-Vehicle Infrastructure. Featuring high temperature operation and digital signing for charging events.The characteristics of single phase two wires (1P2W) and Three phase Four wires (3P4W) Supplies, including voltage, Frequency, Current, Power, Power Factor, Active and reactive energy, Imported or Exported. Energy is measured in terms of kWH and kVArh. Maximum demand on power and current can be measured over pre-set periods of up to 60 minutes. The SDM630-Ev supports Max.100A direct loads per phase, With dual tariff management availability. The meter is designed for DIN-Rail mounting, with IP51 front protection and comes equipped with Pulsed outputs and RS485 Modbus.

Displayed Parameters

• Phase to Neutral Voltage (V)
• Phase to Phase Voltage (V)
• Phase Current (A)
• Voltage Total Harmonic Distortion (U%THD)
• Current Total Harmonic Distortion (I%THD)
• Frequency (Hz)
• Power Factor (PF)
• Current Max Demand (MD A)
• Power Max Demand (MD kW)
• Active Power (kW)
• Reactive Power (kVAr)
• Apparent Power (kVA)
• Import Active Energy (kWh)
• Export Active Energy (kWh)
• Total Active Energy (kWh)
• Import Reactive Energy (kVArh)
• Export Reactive Energy (kVArh)
• Total Reactive Energy (kVArh)